In winter, motorists often have the question of what to do if the lock in the car is frozen and the key is not inserted into the car door lock. After all, the car door does not open, and you need to go. Someone has to go to work, and someone has to take their children to school or kindergarten.
Professional drivers are ready for such situations in frosty weather. But for beginners, a frozen car lock can become a problem. Let’s sort it out.
In frosty weather, very often motorists in the parking lot have to struggle with frozen car locks. The driver sometimes has trouble opening the car door lock in the morning because it simply freezes.
Frost has set in and it is impossible to get into the interior of the car? What should you do to keep the locks and doors from freezing in your car? The door in the car does not lock with the key and does not lock when you turn on the alarm?
Such situations can be very often encountered in the mornings in the winter time of the year in parking lots. As a rule, it happens because the water freezes in the door lock of the car. Often it gets there during car washing. What actions should be taken if the lock picks are covered with ice?
It is rather troublesome to struggle with frozen locks and doors in the car in the morning. It is especially difficult for auto lady. But there is no way out, and it is necessary to go. Therefore, if the lock in the car is frozen and you can’t insert the key into the car door lock, you need to treat the lock channels with a special liquid. Then blow the lock cylinder with air.
Special chemicals are used to defrost door locks. They are available in spray cans. Thanks to sprays, you can easily defrost any icy surface in the car
It seems to us that this would be the safest and most reasonable way to deal with frozen car door locks. Cylinders with lock defroster are not expensive. Therefore, every car enthusiast should have such an alcohol-containing liquid in their arsenal. Using the locks defroster is simple. You need to open the cap. Insert the spout into the latch and press. The liquid gets inside the lock and after a few seconds you can insert the key. The lock is sure to open.
Of course you can also use boiling water but in this case the paintwork of the door will be badly damaged. If hot water gets on the surface of the electronic key, it is very likely to short circuit.
In the winter time, you should blow out all the lock holes after every car wash. This should be done with ordinary compressed air.
Regularly treat the lock picks with silicone grease. It is also a good idea to use this mixture to clean the door seals. This will prevent them from freezing.
Very often motorists, in addition to frozen locks, face with the freezing of the door seal of the car.
In the simplest version, this problem is solved by wiping a clean rag with silicone on the rubber surface of the doors. But it is better to use a proven method, which was worked out for Soviet car enthusiasts.
The way to get rid of freezing car doors is actually simple. After every car wash in the winter time, you need to open all the car doors in the street for a few minutes. This way, the frost will dry out all the wet spots on the doors and body. The surface of the rubber seals will stay dry, and the driver will not have to struggle with frozen car locks.
If you follow these rules, you can forget about the problem of frozen car door locks. A lot of attention should be paid to blowing out the locks of cars that are opened with a key. Silicone grease is desirable to lubricate not only the doors. It is necessary to treat the gas tank lid fasteners, rubber seals of the hood and trunk.